Body Skin 4.3 & Octagon Port 2.5

Body Skin 4.3
Have started to apply masking tape over the Utility arms. I'll then mask off other areas that I don't want primer on. Then spray up the utility arm area & sockets and also re-do all the other areas of the body that have had wood filler applied to smooth over.



picture of arms starting to be masked off

Octagon Port 2.5

Front Octagon Port fitted inside the body, masked off and area sprayed with primer.



Here is the front Octagon Port after I'd sprayed the area around it white.
This will also be covered, to prevent over spray inside of the port.

Here is the rear Octagon Port, now secured in place with it's angle bracket. It just needs P40 resin applied around the edges, inside the body and then wood filler to the front edges/gaps.

Rear Octagon Port.