Have sprayed up the rear hatch now in a few coats of white satin [Plasti-kote].
Lightly sanded between drying to get it nice and smoooooth.
Next was to mask off the grooves, this was done just to prevent any of the silver paint going on my nice white paint.
I masked off a bit at a time and then removed it, to prevent any smudging and transfer onto the white paint.
 |
| Masking tape being applied |
 |
| A steady hand! |
 |
| Rear Hatch now with silver grooves |
 |
| Just a close up of the grooves |
Next I masked off the whole rear hatch and silver spraying the two Coin Return panels.
 |
| Rear Hatch, masked off with yellow paper [colour is optional] and sprayed silver. |
 |
| Masking removed, Coin Returns now in silver. |
No comments:
Post a Comment