On my lunchtime I managed to get another two panels 'grooved'. Then at home spent another 2 & a half hour's doing the rest, plus going over the previous grooves and sanding over the skin. Next I re-counter sunk the screws and then used wood filler to fill them in. Once all that was done I mixed up some PVA glue with water and 'painted' it into the grooves (credit for this has to go to Mr A.Strawson). This is soaked into the wood and helps 'seal' the cut groove edges and makes the spray adhere.
Once it was all dried I gave it a light coat of grey primer.
 |
| 1st coat of primer |
No comments:
Post a Comment