'R0 dome build - 4.2 - 'neck painting'

Oh..... I forgot to include the work i did for the neck ring.....

I used detail pin striping to create my design for R0's neck details. I used this technique on R5 for his top stripes.
It's good because it's tacky enough to stick but not enough to pull paint off, lol. Also it stops the dreaded 'paint bleed'!

Next was to cover the rest of the dome, with A3 sheets of paper. Masking tape was applied to it and then onto the pin stripe edge.

And then it was spray time.

Removing paper and pin stripes.......paper/pin stripes rubbish.

And the finished detail...