Body Skin 2.0 Rear Hatch upgrade

Drilled out area for Power Coupler & Coin Returns, roughly.


Tested the second catch, but it wouldn't let the top of the hatch line up. Probably due to frame/skin/hatch misalignment. So took it off. I did add an inside depth stop. This & the spacer i fitted on the other side, helped with alignment.



I cleaned up the Power Coupler hole in the skin. I then bent up a strip of metal. Marked hole positions & drilled holes for securing to frame & backside of Power Coupler. 

Threading the rear Power Coupler for fixing to metal bracket

Rear Power Coupler fixed in place with the metal bracket

This then makes it easier and gives clear access to the insides of R5...... erm once he's filled up with stuff :)


Next is to do the two Coin Returns.