The tip of the front plate needs to be rounded off.
The picture below with the red line on shows the cut line for the rear plate.
Next is the curved section, which I will make up the same way as I did for the centre leg ones.
November 08, 2011
Main Leg Ankle's thickened up
Didn't have time last night to do this, so on my lunch break, I drilled and counter sunk four off holes each side to secure the extra thickness plates onto the leg.
The picture below with the red line on shows the cut line for the rear plate.
Next is the curved section, which I will make up the same way as I did for the centre leg ones.
The picture below with the red line on shows the cut line for the rear plate.
Next is the curved section, which I will make up the same way as I did for the centre leg ones.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment