05/12/2013

Motivator Base Plate - UPGRADE


Used the first plate as a guide, I marked onto a new piece of scrap aluminium,
the same mounting hole positions and drilled through.
These are the two holes furthest apart [top & bottom in pictures]

I then marked the new position for the motivator securing bolt to go through [middle hole],
which is off-centre now to the securing bolt holes, and drilled.
This will allow the Motivator's position to fit better in the Pie Hole opening.
R5-D4, r5-d4, r5d4, R5D4, bad motivator
Motivator Base Plate, 1st attempt on left, UPGRADE version on right.
(which still needs a hole for wires to fit through)

No comments:

Post a Comment