Leg Assembly 2.3 - Hub hole

Finished the outer hub hole diameter cut-out over a month ago now. Used a cutting tip that came with the router adaptor. I forgot I had. This cut through the wood so much easier :)
Today:
Next I needed to cut the inner recess to depth. So that the Hub would sit flush with the leg.
I used the cutter I bought off e-bay a few weeks ago.

Adjustable Circle Hole Cutter

Started to cut through from the front, then turned the leg over to finish the cut from the other side, as the cutter holders would of damaged the outer hole on the front face.

Shoulder Hub, recessed into the Leg.