Event: Stars of Time @ Weston-Super-Mare

This coming Saturday, November 30th......

Link here:

https://www.starsoftime.co.uk/weston-s-mare-winter

Just some of the droids [from our last attendance] will be joining us this Saturday.

Upcoming event: Stars of Time - November 27th 2022

 

Weston-Super-Mare

this coming Sunday!

looking forward to attending again,

with fellow Droid Builder(s).

Stars of Time

Full details are on their website (click)

or

www.starsoftime.co.uk

Treadwell WED-15 droid build : Part 4 - more eye work

 

Part 4:

Last week was a busy one designing components and how best to make everything fit together lol.

I 3D printed the central eye rod, which will connect to the servo horn extension piece (I had already drawn up the servo horn to be used on R5’s Bad Motivator setup). This may be swapped over with a metal servo horn later.

Here’s latest assembly showing the central rod and servo horn extension piece.

Next was a tie bar to keep the eyes connected and moving together and printed it off. Not sure if I’ll be happy with this idea yet. The central rod servo assembly is shown just in mid position for the picture above.

Here’s link to YouTube short of manual test movement.

Looking at a heavy duty servo, just in case a standard one isn’t up to the task.

I made a start on the ‘mast’ part of the droid, using this image:

Also, this version that was built by:

Paul6700

This is the overall look I’m going for, as to me this is THE look identifiable from the film/promo pics.

I sectioned up the mast, so that the   components can be printed separately.

The plan is to use 40mm dia PVC tube, that the 3D parts fit over. All glued and screwed together. I had planned to print the mast parts over the weekend, but have held off for the moment.

Here’s an assembled picture anyway.

After a comment on my Build Blog over on www.rebeldroids.net , I decided to pause and rethink the mast to base plate union…. It got me thinking about the fact the mast rises up (deleted scene), so I’m redesigning this piece.

I have a motor that used to fit on R5 somewhere. This will require the upper mast to be redesigned to accommodate it.

Before the above pause came into effect, I’d already printed off a ‘cap’ for the mast that fits inside the mast/base plate hole.

The cap is the piece with the three fake hex sockets fitted. I say fake, but they are of use as they extend down inside and hopefully help strengthen the connection between the cap, upper neck join and the base plate.

The original idea (which still may happen) uses PVC tube which will fit up inside the upper neck piece. I also printed a template so that the tube could have slots cut into it at the end, to locate it into the ‘cap’.

See picture below showing the inside of the cap. The template will help cutting the tube to match.

Here you can see the three screws (bolt’s) in the extension parts of the cap.

Well, progress is paused for now until I redesign the rotation setup.

**********

Don’t forget this coming Sunday….

Weston-Super-mare

Upcoming Event: Stars of Time @ Weston-Super-Mare

Stars of Time

return’s to Weston-Super-Mare!

The SOUTHWEST DROID BUILDERS

(representing Droid Builders UK),

will be attending so come along

and see R2-D2 and friends.

Why not make a weekend of it,

check out the official website,

clicking on the picture link below.

Link: https://www.visit-westonsupermare.com/

Link to more event details:

https://www.visit-westonsupermare.com/whats-on/stars-of-time-film-and-comic-con-p3119893

Event Report: 'Stars of Time' @ Weston-Super-Mare 2021

This year Stars of Time, film & comic con, was celebrating its 10th year running!

It was my 1st time attending, as due to family holiday's I've never been able to attend. A few other South West members also attended, which meant we where going to have a great time! :D

I also took my R0 dome & R4's dome, as well as a few other Astromech props and my almost completed GOUD-4 messenger droid, from Solo.

I also carried out a re:MOT on Mike's KN droid.

....Unfortunately, Paul wasn't able to attend with R2-D2, due to work commitments; and Pedge, due to health issues. Mark L from the Northern sector was also not able to attend as well as Matt C and Simon B.

Event Report

We had arranged to meet up at 8:00/8:30am Sunday morning.

It was a clear blue sunny sky that greeted us in Weston-Super-Mare.

The beach, looking South....

Mike's van outside the Tropicana

We unloaded the cars/vans and made our way inside to our area. The entrance we would be using was flat and led straight in off the promenade (just in front on Mike's van). This was where we would be set up for the next two days. The floor is smooth concreate and there is also a ramp leading down to a lower level. There is a door sill leading into the adjacent room, which required a slight lifting of the centre foot, but nothing major.

Table display, banners & backdrop up

As well as the domes, we also had Mark's wood components for his build. Body frame, legs, ankles, feet shells, booster covers and horseshoes, as can be seen in the above picture.

We handed out loads of our trading cards, club pamphlets and stickers.

The domes, R0, R4, R5, R6 (L-R) ...... just missing an R3
(Nik's droid has an R2 dome)

Pit Droids, ready to maintain R5's Bad Motivator.

Pit Droids, ready to maintain R5's Bad Motivator.

For a short 5min video of the droids in action,

click on this link to my YouTube channel.

The doors opened to the public at 10am and there was already a que for people to come in! The morning was a very busy one with lots of people asking questions as well as photos. Also fun as people were unaware that the droids actually moved :D, and jumped when they did!

Mark T was looking after R2-XL, helping people climb up and inside the super-sized droid for photo opps.

Mark & R2-XL (left of picture above)

Mike rewarding Mark by letting him wear his R2 dome lol.

   Donations were collected for   

                  Pedge                   

                      &                       

      Motor Neurone Disease    

      raising just over £123.00     

Mark's C-3P0 shoes.....

Pit Droids keeping the Astromech's in check.

The local news channel were there and filmed interviews with the organisers, they also filmed Mikes R4 droid (green) in action, next to the Milton Keynes Star Wars wall (below).

Milton Keynes Garrison

This was Mike's first official event driving around with his R4-KN droid. I had cleared and passed it earlier in the day as part of the UK MOT system.

Both days there were parades which were led down to the Pier direction, how far it actually went, we didn't see :D, but we did join them on their return for a group photo opportunity outside the front of the main entrance. There were a few interactions with Daleks :D but we managed to avoid any intergalactic incidences.

After this, we retuned inside, to keep Mark T company.

GOU-4 droid being inspected by a Pit Droid

Nik H's droid

Mike B's droid

James F's droid

..... the afternoon was quieting down, so we took the droids for a wander down into the rear room. There Garrick Hagon kindly obliged to a photo shoot with the droids.

www.biggsdarklighter.com

Garrick Hagon with our droids

As you can see, he was most taken by my R4 astromech lol.

The event finished at five PM, but most of the traders were already starting to pack up. So we also made a start on the non essential equipment. Nik & Mark, had the furthest to travel home, and due to the M4 traffic, I had to take the back way back to Bristol. Wasn't so bad a journey though.

Another successful event with the guys, looking forward to the next one!