James' R5-D4: R6 Funko Pop astromech 3D stl

Droid Builder

I’ve now uploaded my R6 domed astromech 3D stl file…...

Both can be found via links above ☝🏽

#funkopop #3dprinting #astromech #starwars

Posted by James_R5D4 at 5:19 pm

AnonymousMarch 15, 2024 10:07 pm
The store will be closing the end of March 2024
ReplyDelete
Replies
James_R5D4June 10, 2025 9:28 am
All my files etc can now be found on my Prusa account for FREE. Check my Linktree in Bio.
ReplyDelete
Replies

James_R5D4: Have always loved Star Wars from a young age and play with all the toys. Now I'm older, I get to MAKE my own toys. I’ve built and still own TK armour, years ago, before I got into droid building. R5-D4 was built on a budget, with a young family, I didn’t have the spare cash to build an 'Aluminium' R5, so I constructed nearly everything myself, and only bought bits that where beyond my abilities to machine or fabricate. This was before the days of 3D printing. I like the challenge of finding out and making things. They say you never really finish building your droid.....well this is true. You always find something new and then upgrade your Droid. I have also been designing 3D models, these can be found on my Prusa page. I hope you enjoy reading, watching and following my progress.

Posts

Posts

Comments

Comments

Trading Card Dispenser : Version 2…. part 2

First test printing of the parts at 0.15 layer height. Then trimming and filing off layer lines so that everything that 'touches' ru...
DROIDS @Mshed Bristol 2025

DROID's @Mshed Bristol, are back! Yes, all your favourite droids are back again, and a few new special attending ones as well!! 💥💥 ...
New RC Transmitter - Exmitter EX7 + mini review

25.10.18 So, at Optimus Bristol, I had a slight accident with my Optics 6 Sport transmitter. Basically I managed to cross the battery conta...
Dome Bag - 2.6 side stitched up. *CONCLUSION*

June 2019 Can’t believe it! Can't understand it either.... I did NOT included the extra thickness of the foam which would increase th...
Corsa transport upgrades - 1.0

May of mentioned before, but my small Corsa, will probably be my main transport for events etc. for future events. The boot load area isn’t ...

For all the droids in Star Wars

My 3D printable files

Victor's R2D2 Building Diary

Left Foot Shell Repair - The other night at the Dodger game, during the photo op one of the fans stepped on R2's foot shell, and part of the foot shell skirt snapped off. The foot ...
4 weeks ago
John's Droid Building Blog

YouTube, COPPA, The World Gone Mad - You may have noticed that now the videos don't work. That's because thanks to YouTube trying to throw all the content creators under the COPPA bus, I have...
5 years ago
lolo080's blog - French R2 builder and star wars fan

droid #2 : small update in the dome - I've worked into the R2-M5's dome. The first modification is a small alu bar on the diameter to hold the lipo battery with switch and fuse. the second ...
7 years ago
red's Droids

R3-AZ Dome finished. - Yet another dome is ready for this imperial body. This was sort of a fun project. Pain staking work of masking, JB weld.. Nearly all the parts fell off ex...
8 years ago
Turners Toy Builds

New Blog Alert!!!!!!! - In order to make things easier & gather a few more followers this blog is now at R2-ST Astromech Build Thanks
11 years ago
The R2-A4 Project

End of 2012 Update - R2 was officially finished just before Halloween 2012. I had him all ready to go, but then I stripped one of the motor shafts and R2 was back in the repa...
12 years ago
Podpadstudios

-
Emy

-