17/07/2017

R5's transport sledge 'upgrade work' pt 7

Had time at the weekend to finish off cutting out more wood from the sledge.

Time and thought has to go into where to and where not to cut!
As you need to think about any potential weak points. Hence the rounded hole edges etc.


Once all were cut out and edges taken off with a file and then sanding.
The frame top section was re-attached.


The frame is now no effort to lift, I don't have to tense up my body/arm to lift it by itself.

Next was to apply the first touch-up coat of paint to the cut areas & to give the whole frame a fresh coat.

No comments:

Post a Comment