Leg Booster Cover Unit 1.3

Cut out top piece to be fitted. And added some marking guides.

 Drilled and counter sunk two screws.

Using Coping saw, cut back marked radius. Then cut out front radi, on angle. Cut the two side angles, these will need some wood filler. Then spent the next 30mins filing radi to blend in with each other lol.



Starting to take shape

Marked where slot holes will go. Then started on the first slot.

I used an 6mm diameter drill and cut out using a junior hacksaw [remove/re-fit blade]. Finished off with some filing. I removed the knot from the top as it was loose and didn't want it messing things up.