02/02/2018

Jessika 'Testor' Pava - Flight suit 2.2

Work done last year 13.6.2017.....Thought these following post's had been posted


Usual busy family weekend stuff, but i was able to re-make a start on the blast shield. Using a hot glue gun to get started, i cut out and positioned roughly where the sides would go. Next was over the top strips, cross strips, followed by larger flatter pieces.

The start of the cardboard strip framework.

Next then was to start applying fiber glass and resin to form the base of the shield.

Resin applied to framework.


The plan is to create the shield, then make a silicone mold to then create a slush cast from it.

No comments:

Post a Comment