08/09/2017

R0-D4 dome upgrade 2017 - 1.7 - 3D printed Dome Rods **UPGRADE**

Test fitted the first new dome rod the other day. Due to the internal angles of the wood when it was glued together, these are not perpendicular, so I had to file the ends slightly for it to fit. I know I'll have to do the same with the others.

Next was to drill location holes to hold the new rods in place from behind. The previous rods were slotted into a bottom hole and secured with a screw at the top.
Then its sanding etc before spraying up.

No comments:

Post a Comment