James' R5-D4

Of course, the droid you've all been waiting for.....🎉🎉🎉🎉 The 3D stl file for the Funkopop R5-D4 in three leg mode has now been upl...

January 2024 With everything going on I didn’t get round to uploading the file for R2 in his three legged driving mode. This dome was my own...

December 18th continued : Thursday after work, I set up the Tevo printer to print off the upper body section, hopefully from the point it st...

 A week ago I had to drop my daughter off at a dance lesson, with an hour to kill I had a walk around the local shops. Mostly charity ones, ...

Each week I usually focus on just one particular project. Recently though, I’ve been working on a few. LED’s light strip, see workbench upgr...

November 12th weekend : Had an email notification saying someone had made a purchase of my 3D printable R5 in Carbonite on my Etsy account. ...

March 2022 Wanted to do this for a while, but didn’t want to actually cut up a Funko, so I used my original bobble head design and found a s...

Above image shows, finished model with additional silver coloured PVA glue for the frozen carbonite After a long thought process, I've d...

November: I had seen someone add paint to a mixture of PVA glue, this worked great!! Perhaps it was the paint I used, but it made the glue l...

3D printing in progress.... 9hrs 40mins to print. No supports underneath as didn’t want to waste filament, see below for underside pictures....

 For those who can't paint or choose not to lol :D I thought I'd create these POP's as frozen in carbonite blocks. As I had just...

  So for over a year, I thought the file for my outer foot had been uploaded to Thingiverse, and as nobody had asked about it, I would natur...

  The other day on the Astromech.net forum , it was noted to me that some of my links were flagged up with the dreaded 404 error message scr...

Eventually got around to uploading ALL the stl files for R5's Funko model. The dome/body prints in two half's, front/rear. The legs,...

 The second half [rear] printed great and didn't require much clean-up. The support did come away for the antenna, but it still printed ...

 So in my last Funko POP update, I mentioned a few new ideas to print off the parts and the time involved. I will admit that the printing t...