R5-D4 Carbon Frozen progress

November:

I had seen someone add paint to a mixture of PVA glue, this worked great!!

Perhaps it was the paint I used, but it made the glue lumpy, which added to the textured effect. I mixed up a few batches to not waste, but also to see if it would actually dry 😄.

…..which it eventually did, took a bit longer though.

Project paused till December:

I dug out this project and checked that the glue had now fully dried, before I applied the same paint over the exposed areas.

It just needs a few more coats.

Link to file: https://www.thingiverse.com/thing:4983351

#carbonfreezing #funkopop #R5D4