James' R5-D4

Back in February : I installed the volume control. Another thing that has been sat on my workbench, that I needed to fit. I decided to take ...

Made up a new bracket for holding one speaker, out of some MDF wood. The prev one was perspex and was attached to the old sound board. I may...

Back in August 2020      After lots of design layout ideas, and 3D printing a special holder for the sound components. I decided to just go ...

Just uploaded the two versions of my digital volt meter holders. A single version 2, without the extra unnecessary raised panel. ...

16.6.2020 Latest prints, printed by co worker Will and kindly posted as well. Volume control box holder : Designed this up to ho...

So yesterday I re-designed the servo panel and sent it to the printer. Four hours plus later, it finished....just in time for me to leave wo...

Last week, the last two panels have been worked on (17.11) Panel 5 received a PVA wash, rasp work to take off the edges and sanding with p...

This was more work I'd completed at the beginning of the month but hand't had time to post up: With the new addition of the SyRen1...

So Saturday afternoon I spent working out how I was going to fit the new bearing. I had planned to router out the original lower ring, but t...

I've cut down the perspex sheet to a more manageable size, though it's still to be test fitted inside R5's body. Cleaned up the...

AUDIO FX SOUND BOARD With all the soldering going on, I didn't like the look of the work I had done on the Audio FX sound board. So as ...

As I'm still waiting for parts, I didnt want to be left waiting to be able to power the dome motor. So I rigged up a stand alone unit, w...

Sunday I started sorting the servo leads, firstly by cutting off the end female plug as the wires are fitted into terminal blocks on the spe...