Motivator Base Plate - UPGRADE

Used the first plate as a guide, I marked onto a new piece of scrap aluminium,

the same mounting hole positions and drilled through.

These are the two holes furthest apart [top & bottom in pictures]

I then marked the new position for the motivator securing bolt to go through [middle hole],

which is off-centre now to the securing bolt holes, and drilled.

This will allow the Motivator's position to fit better in the Pie Hole opening.

Motivator Base Plate, 1st attempt on left, UPGRADE version on right.
(which still needs a hole for wires to fit through)