Extra Projects & Event Page's

▼
Showing posts with label R5-D4 Shoulder Hydraulics. Show all posts
Showing posts with label R5-D4 Shoulder Hydraulics. Show all posts
November 07, 2013

Horseshoe No2 takes a bit more shape

›
This work I did last month, but forgot to post to Blog. So I finished glueing the two sections together, then glued in the dowels to locat...
October 15, 2013

Horseshoe No2 [for Leg No1]

›
Lunchtime I got to cutting out the slot for the Hydraulic Unit. Drilled single hole, then threaded through the Coping Saw and got .....erm...
February 20, 2013

Leg No.2 - Horseshoe No.1 complete

›
Other little bits of work that have slipped through the net I masked off and silver sprayed the grooves on my shoulder horseshoe. I then s...
January 24, 2013

Leg No.2 - Horseshoe No.1 - 1.6

›
Drilled out the fixing holes in the horseshoe already there, to pushfit in the dowel pegs. Here it is test fited in place along with it...
January 18, 2013

Leg No.2 - Horseshoe No.1 - 1.5

›
Drilled clearance holes in the back pieces of the horseshoe. This will allow the bolt heads to be recessed inside, to clamp the hydraulic ...
August 31, 2011

Shoulder Hydraulic location pins

›
Eariler today, a two minute job of shaping these two dowels to fit in the Shoulder Hydraulic Units, to secure them in place. Of course,...
August 01, 2011

Shoulder Hydraulics no2 completed

›
Forgot to mention, that I'd also completed the second Shoulder Hydraulic last week too.
July 25, 2011

Shoulder Hydraulics no1 completed

›
Finished off machining the flats onto the sides of the Shoulder Hydraulic. Already started on the second one lunchtime.
July 24, 2011

Work so far.... Shoulder Hydraulic and Centre Leg work

›
Friday in work: I milled flat the rear of the shoulder hydraulic unit. Also drilled two location holes, for fixing it with dowels into the s...
July 20, 2011

Shoulder Hydraulics

›
Started now on the Shoulder Hydraulics. Will turn it as one piece and then Mill the flats onto it.