Whilst in the queue for the Rise of the Resistance ride, one of the things I noticed where these cool lamps.
Thought they’d be good to CAD up, so placed a popcorn bucket next to one for scale and took photos.
First version was a one piece model but this wouldn’t be printable even on the Ultimaker S5 (height wise) so would only be printable on very large print machines. Also I wasn’t happy about overhang’s and support material wastage. So I sectioned the model up for easier printing and to achieve better quality resolution on the detail pieces.
 |
| This base version was from the original design which included the details. |
 |
| I didn’t print the sides vertically as shown, but flat. First a single print, then multiples, once I was happy. |
 |
| The pieces shown in their print orientation. |
 |
| The base has recessed lips for the details to attach to. |
 |
| The side pieces being glued together. |
 |
| The details (6 top, 6 bottom) glued on. |
Link to my Prusa page for free stl files below……
UPDATE 19/9/2023: link to files click here
💥💥💥💥💥💥💥💥
UPDATE 22/2/2024
Checkout JG's remix to add lights to the lamp.
Link added to post.
ReplyDelete