Friday 18th November
Part 3:
Did some modifications to the main plate, as I was happy with it’s strength, so included the missing angles and the rear cutout, also noticed that there’s a bolt or something, hanging down at the rear, so added a hole so I wouldn’t forget to add later 😂. Added some fake parts for illusion purposes.
Printed it off and really happy with it. Check ☑️
Made a longer set of location pins to replace the front ones.
Next up was designing how to fit a servo to move the ‘eyes’ up and down. Printed off a cropped piece, then surgically fitted it into one of the eye side pieces by cutting out a panel.
I may need to make a removable panel so that the servo can be replaced if it failed….
No comments:
Post a Comment