Solo - a Star Wars story - Irradiator Illumination Bank 3D printing Part 5

Progress so far:

• Clips printed to hold the ‘windows’ in place.
• Spacer/washers for the handle pivot points.
• Handle details.
• Handle sprayed up.
• Sourced additional greeblies.
• Illumination ideas.

Window clips:

These are to be glued in place, probably hot glue, to hold the two half's of the windows in place. They wedge under the windows.

The handle:

This got sprayed up in the silver and I printed out some small greebly details to add to the plain sides. I also printed out some poly washer/spacers for the pivot points.

Additional greeblies:

I went searching for parts to add to the overall appearance. I dug out old 3D printed pieces from previous builds as well as things that have been seen in the ‘SW Universe’ directories.

Illumination:

The unit needs lighting, so have been looking at how best to achieve this.

I’ve come up with a few ideas, but the top window illumination has been sorted.

This LED unit has five really bright LED’s, four of which shine towards the windows.