Electrical System Update 2020 - 1.3 cable tidy

As I mentioned in my last post, I used yellow cable for the positive 12 volt side of R5’s electrical system. Connectors were soldered and heat shrink applied. Label's to identify were also added, before the expanding cable sleeve was applied to keep everything tidy.

Heat shrink was applied to the ends and I also added cable ties.

Terminal block to distribute 12 volt power.

Switch to control power to the feet motors,

having heat shrink applied over it’s terminals.

The switches in place with heat shrink applied.

Cables with sleeving and labels identifying 24 volt power system.

And a pic of the (almost) finished wiring setup.

It's all now looking really neat!