Transmitter Ex7 switch upgrade - rotary to switch, part 2

Finished putting a groove in the new switch locking ‘cap’.
I used a grooving tip tool to scrape/shape the slot.

Got home and the posty had delivered the pack of resisters. So test soldered up the resistors & wires to the two switches and tested them with batteries in the transmitter. And the switch works, via the transmitters screen, still need to actually test via the reciever.

The above picture shows the resistors and wires soldered up to test it worked. Exposed wires will be insulated once completed.

My 'cap' fitted to the switch CH7 in picture above.