3.5.19 After seeing ones available on the Astromech forum, I thought I'd have a go at designing my own as all I need is just power to the dome. I searched up on eBay and found the magnets needed. I then drew up a few ideas, this is the first test piece.
I printed these off and when I got home, the magnets had arrived in the post. So I tested them out by fitting them into the recessed holes.
This was my first go and was happy it worked. I next thought about ensuring correct alignment & cable fitting etc. October I had a break/holiday over the summer and have restarted again with ideas. Some where a bit over the top and a bit to complicated lol.
No comments:
Post a Comment