Extra Projects & Event Page's

October 27, 2017

New Dome - woodwork frame for........ R4-D4

There's still a long way to go, and home life has limited my available free time to actually work on the frame for the new dome. So I took it all into work to try and utilise my early morning starts & lunchtimes to crack on with this build.
This was my starting point, over a month ago now. I'm now happy that this is going to work to be able to share more of my work. The idea for the framework is a modified version, but also simplified version, of what I had seen online by another builder. Credit goes to : Scott Kraft (pithyscott on Instagram)



The side triangle panels will be possibly/temp held
in place with panel pins for the building purposes.
The above picture gives you an idea, the rear triangle is pinned in place.
The centre dowel was to help support the top while I messed around with the uprights.


 There is a upright missing on this side, this is because I need space for R4's holo eye unit to fit. I need to make up a different upright arrangement to support the triangle panel etc.

All uprights temp in place. Next up is to cut out the top plate, to save weight and also give access to inside the dome.

Here's the work for the holo eye box unit. Grooves cut into side panels for the front panel to sit in. Glued up and fitted together.


And the semi completed box unit. There are several different looking box designs, I've gone with fellow UK R2 Builders Colin & Brad (slightly different again).
This simple design suits me.


Next up was to glue in support fixing blocks, seen in picture below.
Still need to add two more to the lower angle face, to make four fixing points.

And here's a mock-up of some of the panels with the holo eye temp screwed into place.

Am on my 3rd attempt at a 3D printed servo holder to fit behind, am 90% happy I've got this sorted now.....well, until I get it all fitted up and it doesn't work! lol

No comments:

Post a Comment