I had been applying body filler to the area's that already had strength. A lot of sanding but thankfully, not to much shaping needed. It helps if you apply thinly and as smoothly as possible.
Next I marked and cut out the crest shape that's on the lower rear of the helmet. With all the other things during researching, the rear area was one part I missed. Mainly due to there not being very many rear shots.
 |
| rear crest marked for cutting |
I slotted out and attached a piece of card to give the end shape.
I then started applying fibre-glass matt to strengthen it all.
No comments:
Post a Comment