Booster Cover 2.4 - The second Leg

It's been over a month since I first wrote this post.

Wasn't happy with the fit of the Booster Leg Strut's top square piece sitting inside the dog house of the Booster Cover. It didn't go far enough up inside it. So got to work with a file and now it fits much better. I used up what was left of the primer and also the blue spray. No point in spraying all over as still have the grooves to cut.

UPDATE:

I also had to machine down the diameter of the Booster Strut, as it was a bit snug fitting. The Cover opening was at fault.

UPDATE 04.01.13

I marked up and using my dremel, cut out the grooves in the Booster Cover, next is to primer, blue spray and clear coat.