Leg Assembly 2.0

Enlarged booster cover slots to the correct width size. Then re-sprayed with primer.

Marked position of where holes are going in leg for booster cover and used a dia 10mm drill. This will allow for PVA glue and alignment.

Also drilled seconed ankle detail for fitting of dowels. Then drilled into leg. Which i had already template marked.
Sprayed 'booster cover' with metalic blue. Gave it a few coats. Looks good :-)

Silver paint applied to grooves, slots & recesses with a modelers paint brush. Wear'n'tear marks added along edges.