Extra Projects & Event Page's

▼
Showing posts with label ultimaker S5. Show all posts
Showing posts with label ultimaker S5. Show all posts
October 17, 2024

Flag Banners: DIY Build (not yet completed)

›
April 2024: I had an idea to utilise a load of PVC tubing i had in the garage. By turning them into flag banners. I went with the pivoted to...

Treadwell WED-15-77: mast box build (not yet made)

›
March/April 2024 With the tracks completed (at the time of writing this) , and after making the head box, I needed a storage/transport box f...
August 09, 2024

FunkoPOP Treadwell Droid WED-15 (Version 3C)

›
So here he is, version 3B,   version 3C As I mentioned in the last post, version 3, had been modified so that the claw end was supported onc...
February 04, 2024

Treadwell WED-15 : Head Box build - part 2

›
January : Note : Handles arrived, 😂 lol but the weight of the box isn’t enough to overcome the springs in them 🙄😂. So I went back to my o...
February 03, 2024

Treadwell WED-15 droid build : Part 23 - woodwork, 3D printing, test drive

›
  January into February 2024 Have been working on: Power Wheels - drive axles Axle bushes Polypropylene washers Electrical/electronics Bodyw...
January 13, 2024

Treadwell WED-15 : Head Box build - part 1

›
December 2023 : Head box - transportation/storage This was something I needed, so I measured & sketched up a suitable size box, allowing...
November 24, 2023

R5-D4 Funko Pop inspired 3D model

›
Each week I usually focus on just one particular project. Recently though, I’ve been working on a few. LED’s light strip, see workbench upgr...
3 comments:
November 01, 2023

Treadwell WED-15 droid build : Part 21 : Base / arm 4 upgrades / manual

›
 This post covers a few topics: Base problem  Arm 4 alternative version Arm 5 claw 3D printing Arm 5 claw articulated 3D version ‘Stick Droi...