I have the other end to bond next. And I also have the other side piece details cut out from when I made the first Outer foot, so this should help speed up the build process.
Extra Projects & Event Page's
- Home
- Trading Card Dispenser (version 2) - TCD [2020/2022]
- R5-D4 - Trading Cards
- R5-D4 - silver neck details
- R4-D4 - Dome [wood build]
- R0-D4 Dome [wood build]
- 3D Printing - Star Wars stuff
- *** Star Wars Shoes ***
- GOUD-4 Messenger Droid - Solo ASWS
- Event's 2018
- Event's 2017
- Event 2016 - "Celebration Europe"
- Event's 2015
- Event 2014 - Chippenham Sci-Fi
- R5-D4 - events page - The beginning (2013)
- ** R5-D4 patch **
- R5-D4 Photos
- Han Solo - costume for my Son
- Droid Caller - Han Solo style
- Boba Fett - costume build for my Son
- Scanning Crew Container - Transmitter Storage Box
- Stormtrooper - me
- ROGUE ONE - trading card storage box
- Rogue One
March 12, 2013
Outer Foot No.2 - 1.1 Build starts
Bought some more car body resin at the weekend and last night started to bond the second Outer Foot shell together.
Knurled fittings for Battery Box Hose's - 1:1
I've bought a set of Knurled hose fittings off e-bay from Don Jarr. This will save me some time rather than make a set. Available access to a free lathe in work has been limited, due to them being used for work :-( lol :-D
March 08, 2013
Braided Hose - the making of :D
Yesterday when I got home my 'copper braid' had arrived..... well the computer cable it insulated did lol. Following the idea from a fellow builder Astromecheadaches . I carefully cut the plastic tubing along it's length and then removed the cables. I then cut it to length 304.8mm and then taped it up and fed it back through the copper hose. The tape is to stop the tube from catching on the copper braid......which on my first attempt it did!
The hose was just the right length. The diameter isn't 12mm (1/2") but its a small price to pay.
Just need to buy 3 more!
The hose was just the right length. The diameter isn't 12mm (1/2") but its a small price to pay.
Just need to buy 3 more!
March 07, 2013
Battery Box No.1 - 1.6 - Battery Straps
Cut & glued on 3 angles & front strip in-fill. Then cut out front raised 'blue' pieces 4 off, filed angles.Applied watered down PVA glue to seal. This piece will be glued on once painted [this is the flat piece that's just resting on the battery strap in the picture below]. Cut & glued in place 2nd lower piece. Then started on top pivot pieces, 1 done.
A bit of Sanding & applying of wood filler.
This picture shows one 'mock-up' of battery harness strap :)
March 03, 2013
Outer Foot No.2 - 1.0 Small update
Outer Foot No2.
Started to cut out the second foot shell pieces.
And also the internal pieces I'll be using to make the temp. foot stand.
Started to cut out the second foot shell pieces.
And also the internal pieces I'll be using to make the temp. foot stand.
Battery Box No.1 - 1.5 - Battery Straps
Started making the battery straps on Saturday. Started on just the two then thought I might as well make all four up at the same time. So after working out HOW I was going to make them, I started by cutting up four lengths. I then cut some 3mm thick hardboard to size for the top 'box' section. These were glued in place with PVA glue to the sides [pic below, two on the far right]. Next came the side angled pieces.
These were angle cut then the backs were filed to an angled point.
The front was then filled in with another 3mm piece of hardboard, before wood filler was applied all over to make level [the two on the left of pic].
I only had time to make a start on one of the bottom pieces [far left of pic].
So far, it's not looking to bad :)
March 02, 2013
Braided Hose
Of all the bits to find, make or buy...... these are as hard to find as.......well........copper braided hose! lol. There are 'part runs' but alas, are out of my budget. So next we turn to the alternative's.
If you look hard enough, you can find stainless steel braided hose. And we are not talking about your shower type hose either lol :D. These would obviously have to be painted to suit.
Then a fellow builder Astromecheadaches found these and with a bit of modification, made himself a set of hose's. I have been looking at these, below.
If you look hard enough, you can find stainless steel braided hose. And we are not talking about your shower type hose either lol :D. These would obviously have to be painted to suit.
Then a fellow builder Astromecheadaches found these and with a bit of modification, made himself a set of hose's. I have been looking at these, below.
click image to go to ebay page
|
Subscribe to:
Posts (Atom)